KOBE Brand Range Hood CH22 Series Model No. Under Cabinet: CH2230
7 SAFETY WARNING HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF REMOVING ANY PARTS FOR INSTALLING, CLEANIN
8 UNDER CABINET INSTALLATION Preparation before Installation NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPE
9 - Align and secure Top Vent Cover {E} and 3-1/4” x 10” Vent Cover (removed from rear exhaust) using 14 screws (13 screws taken from 6
10 Ductwork Installation 10. Use steel pipe to connect the exhaust on the hood to the ductwork. Use duct tape to make all joints secure and air ti
11 WALL MOUNT INSTALLATION ***This installation required to have Duct Cover Model No. CH1120DC-1.Preparation before Installation NOTE: TO AVOID DA
12 4. For Rear 3-1/4” x 10” vent installation only: - Remove attached 6” exhaust and discard. (Figure 12) Keep 13 screws to install vent covers.
13 Wiring to Power Supply CAUTION: If moving the cooking range is necessary to install the hood, turn off the power in an electric range at the mai
14 Install Accessories (For Baffle Filter models) 15. Place baffle filters & spacers underneath the hood. (Figure 20) Install Accessor
15 OPERATING INSTRUCTIONS Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooki
16 appear in the LED Display. The icon will flash while ECO Mode is operating on QuietMode™. To deactivate, press and hold control button until
IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping
17 MAINTENANCE For optimal performance, clean the range hood surface and baffles regularly. To Clean Hood Surface CAUTION: NEVER USE ABRASIVE C
18 SPECIFICATIONS MODEL / SIZE For Baffle Filter Models: For Under Cabinet Application For Wall Mount Application CH2230SQB-1 (30”)
19 OPTIONAL ACCESSORIES (W x D x H) 1) Two-Piece Adjustable Duct Cover (Included in Wall Mount Hood) CH1120DC-1: 11-13/16" x 10-7/
20 MEASUREMENTS & DIAGRAMS ***All inch measurements are converted from millimeters. Inch measurements are estimated. ***All measurements in ( )
21 -FOR UNDER THE CABINET- MODEL NO.: CH2730SQB-1 (30”) / CH2736SQB-1 (36”) CH2742SQB-1 (42”) / CH2748SQB-1 (48”) 30" = Knock
22 ***Hood-Mounting Bracket ***Duct Cover-Mounting Bracket ***Duct Cover Support
23 PARTS LIST For Oil Container models only. MODEL NO.: CH2230SQ-1 and CH2230SQ-WM-1 (30”) CH2236SQ-1 and CH2236SQ-WM-1 (36”) NO. DESCRIPTION MODE
24 For Oil Container models only. MODEL NO.: CH2230SQ-1 and CH2230SQ-WM-1 (30”) CH2236SQ-1 and CH2236SQ-WM-1 (36”)
25 For Baffle Filter models only. MODEL NO.: CH2230SQB-1 and CH2230SQB-WM-1 (30”) CH2236SQB-1 and CH2236SQB-WM-1 (36”) NO. DESCRIPTION MODEL /SIZE
26 For Baffle Filter models only. MODEL NO.: CH2230SQB-1 and CH2230SQB-WM-1 (30”) CH2236SQB-1 and CH2236SQB-WM-1 (36”)
[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENTS IMPORTANT SAFETY INSTRUCTIONS ...
27 For Baffle Filters models only. MODEL NO.: CH2730SQB-1 and CH2730SQB-WM-1 (30”) CH2736SQB-1 and CH2736SQB-WM-1 (36”) NO. DESCRIPTION MODEL /SIZE
28 For Baffle Filter models only. MODEL NO.: CH2730SQB-1 and CH2730SQB-WM-1 (30”) CH2736SQB-1 and CH2736SQB-WM-1 (36”)
29 For Baffle Filters models only. MODEL NO.: CH2742SQB-1 and CH2742SQB-WM-1 (42”) CH2748SQB-1 and CH2748SQB-WM-1 (48”) NO. DESCRIPTION MODEL /SIZE
30 For Baffle Filters models only. MODEL NO.: CH2742SQB-1 and CH2742SQB-WM-1 (42”) CH2748SQB-1 and CH2748SQB-WM-1 (48”)
31 CIRCUIT DIAGRAM MODEL NO.: CH2230SQB-1 and CH2230SQB-WM-1 (30”) CH2236SQB-1 and CH2236SQB-WM-1 (36”) CH2230SQ-1 and CH2230SQ-WM-1 (30”) CH2
32 MODEL NO.: CH2742SQB-1 and CH2742SQB-WM-1 (42”) CH2748SQB-1 and CH2748SQB-WM-1 (48”)
33 TROUBLE SHOOTING Issue Possible Cause Solution After Installation, both motors and lights are not working. The power is not on. Make sure the c
34 WARRANTY WARRANTY CERTIFICATE KOBE Range Hoods (referred to herein as “we”or “us”) warrants to the original purchaser (referred
35 If we determine that the warranty exclusions listed above apply or if you fail to provide all necessary documentation for warr
36 WARRANTY INFORMATION FORM Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1
1 IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK O
KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CA
2 What to Do In The Event Of a Range Top Grease Fire • SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the
3 COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) For Models with Oil Containers: CH2230SQ-1 and CH2230SQ-WM-1 (30”) CH2236
4 (Must keep all material for returns or refunds) For models with Baffle Filters: CH2230SQB-1 and CH2230SQB-WM-1 (30”) CH2236SQB-1 and CH2236SQB-WM-
5 (Must keep all material for returns or refunds) For models with Baffle Filters: CH2730SQB-1 and CH2730SQB-WM-1 (30”) CH2742SQB-1 and CH2742S
6 INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Insta
Comments to this Manuals