Kobe IS2236SQB-DC16-1 Manual

KOBE Range Hoods Model No. IS2236SQB-DC16-1 (36”) IS2236SQB-DC22-1

7 Hood Installation 11. Place four (4 x 8 mm) temporary screws (provided) to hold the duct cover up. Install the hood as shown in Figure 5.

8 OPERATING INSTRUCTIONS Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust

9 ECO Mode can be activated while fan is running or off. Press and hold button until icon briefly appears in the LED Display. While fan is runn

10 MAINTENANCE SAFETY WARNING NEVER PUT YOUR HAND INTO AREA HOUSING THE FAN WHILE THE FAN IS OPERATING. Cleaning Hood Surface CAUTION: NEVER

11 SPECIFICATIONS MODEL / SIZE For 36” model For 42” model IS2236SQB-DC16-1 IS2242SQB-DC1

12 MEASUREMENTS & DIAGRAMS  All measurements in ( ) are millimeters.  All inch measurements are converted from millimeters. Inch measureme

13 PART LIST MODEL NO.: For 36” model For 42” model IS2236SQB-DC16-1 IS2242SQB-DC16-1 IS2236SQB-DC22-1 I

14 MODEL NO.: For 36” model For 42” model IS2236SQB-DC16-1 IS2242SQB-DC16-1 IS2236SQB-DC22-1 IS2242SQB-DC

15 CIRCUIT DIAGRAM MODEL NO.: For 36” model For 42” model IS2236SQB-DC16-1 IS2242SQB-DC16-1 IS2236SQB-DC22-1

16 TROUBLE SHOOTING Issue Possible Cause Solution After Installation, both motors and lights are not working. The power is not on. Make sure the

READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping damages, cosmetic damages

17 WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized Dealer. Pl

18 4. Incorrect electric current, voltage or wiring. 5. Improper usage of the product such as commercially, outdoor or other usage other than its

19 WARRANTY INFORMATION FORM W WARRANTYARRANTY INFORMATION FORM Fill in the blanks

KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA

[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENTS IMPORTANT SAFETY INSTRUCTIONS ...

1 IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

2 What to Do In The Event Of a Range Top Grease Fire • SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the

3 COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) Range Hood Box (Box 1 of 2) {A} KOBE Range Hood {B} Mounting Template

4 INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TABL

5 Preparations of Ductwork and Location NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING. - Decide the

6 Wiring to Power Supply SAFETY WARNING RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY