KOBE Brand Range Hood Model No. CH2230SQ-1 (30”) / CH2236SQ-1 (36”)
7 SAFETY WARNING HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF REMOVING ANY PARTS FOR INSTALLING, CLEANING OR SERVICIN
8 UNDER CABINET INSTALLATION Preparation before Installation NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING. - D
9 - Align and secure Top Vent Cover {E} and 3-1/4” x 10” Vent Cover (removed from rear exhaust) using 14 screws (13 screws taken from 6” exhaust. (Fig
10 Ductwork Installation 10. Use steel pipe to connect the exhaust on the hood to the ductwork. Use duct tape to make all joints secure and air tight
11 WALL MOUNT INSTALLATION ***This installation requires purchase of duct cover Model No. CH1120DC-1.Preparation before Installation NOTE: TO AVOID D
12 4. For Rear 3-1/4” x 10” vent installation only: - Remove attached 6” exhaust and discard. (Figure 12) Keep 13 screws to install vent covers. - Re
13 Wiring to Power Supply CAUTION: If moving the cooking range is necessary to install the hood, turn off the power in an electric range at the main
14 Install Accessories (For Baffle Filter models) 15. Place baffle filters underneath the hood. (Figure 20) Install Accessories (For Oil Container mod
15 OPERATING INSTRUCTIONS Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust speed
16 appear in the LED Display. The icon will flash while ECO Mode is operating on QuietMode™. To deactivate, press and hold control button until
IMPORTANT READ THIS FIRSTREAD BEFORE INSTALLATIONϭ͘ ĂƌĞĨƵůůLJĐŚĞĐŬĂůůĐŽŶƚĞŶƚƐŽĨƉĂĐŬĂŐĞƐ͖Ϯ͘ dŚŽƌŽƵŐŚůLJŝŶƐƉĞĐƚƚŚĞƵŶŝƚĨŽƌĂŶLJĐŽƐŵĞƚŝĐĚĂŵĂŐĞƐ
17 MAINTENANCE For optimal performance, clean the range hood surface and baffles regularly. To Clean Hood SurfaceCAUTION: NEVER USE ABRASIVE CLEANE
18 SPECIFICATIONS MODEL / SIZE For Baffle Filter Models: CH2230SQB-1 (30”) ; CH2236SQB-1 (36”) CH2730SQB-1 (30”) ; CH2736SQB-1 (36”) ; CH2742SQB-1 (4
19 For Baffle Filter Models: SPEED QuietMode™ 1 2 3 4 5 Air Capacity (cfm) 280 350 420 510 610 720 Sone* (dB) 1.0 (40) 1.4 (45) 2.8 (5
20 MEASUREMENTS & DIAGRAMS ***All inch measurements are converted from millimeters. Inch measurements are estimated. ***All measurements in (
21 MODEL NO.: CH2730SQB-1 (30”) / CH2736SQB-1 (36”) CH2742SQB-1 (42”) / CH2748SQB-1 (48”) -FOR UNDER THE CABINET- 30" = Knockout
22 ***Hood-Mounting Bracket ***Duct Cover-Mounting Bracke ***Duct Cover Support
23 PARTS LIST For Oil Container models only. MODEL NO.: CH2230SQ-1 (30”) CH2236SQ-1 (36”) NO. DESCRIPTION MODEL /SIZE PART NO. 1 6” Exhaust L1-024
24 For Oil Container models only. MODEL NO.: CH2230SQ-1 (30”) CH2236SQ-1 (36”)
25 For Baffle Filter models only. MODEL NO.: CH2230SQB-1 (30”) CH2236SQB-1 (36”) NO. DESCRIPTION MODEL /SIZE PART NO. 1 6” Exhaust L1-0241-0001-A
26 For Baffle Filter models only. MODEL NO.: CH2230SQB-1 (30”) CH2236SQB-1 (36”)
[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENTS IMPORTANT SAFETY INSTRUCTIONS...
27 For Baffle Filters models only. MODEL NO.: CH2730SQB-1 (30”) CH2736SQB-1 (36”) Optional Duct Cover NO. DESCRIPTION MODEL /SIZE PART NO. 01 Hood
28 For Baffle Filter models only. MODEL NO.: CH2730SQB-1 (30”) CH2736SQB-1 (36”)
29 For Baffle Filters models only. MODEL NO.: CH2742SQB-1 (42”) CH2748SQB-1 (48”) Optional Duct Cover NO. DESCRIPTION MODEL /SIZE PART NO. 01 Hood
30 For Baffle Filters models only. MODEL NO.: CH2742SQB-1 (42”) CH2748SQB-1 (48”)
31 CIRCUIT DIAGRAM MODEL NO.: CH2230SQB-1 (30”) / CH2236SQB-1 (36”) CH2230SQ-1 (30”) / CH2236SQ-1 (36”) CH2730SQB-1 (30”) / CH2736SQB-1 (36”)
32 MODEL NO.: CH2742SQB-1 (42”) , CH2748SQB-1 (48”)
33 TROUBLE SHOOTING Issue Possible Cause Solution The power is not on. Make sure the circuit breaker and the unit’s power is ON. Use a voltage mete
34 WARRANTY WARRANTY CERTIFICATE KOBE Range Hoods (referred to herein as “we”or “us”) warrants to the original purchaser (referred to herein as
35 If we determine that the warranty exclusions listed above apply or if you fail to provide all necessary documentation for warranty service, you wil
36 PRODUCT REGISTRATION Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1. Date of purch
1 IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
37 KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA http://www.KOBERangeHoods.com This KOBE hood is made for use in the USA and CANADA only.
2 What to Do In The Event Of a Range Top Grease Fire • SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the bu
3 COMPONENTS OF PACKAGE (Must keep all material for returns or refunds)For Models with Oil Containers: CH2230SQ-1 (30”) / CH2236SQ-1 (36”) Range Hoo
4 (Must keep all material for returns or refunds)For models with Baffle Filters: CH2230SQB-1 (30”) / CH2236SQB-1 (36”) Range Hood Box Duct Cover Bo
5 (Must keep all material for returns or refunds)For models with Baffle Filters: CH2730SQB-1 (30”) / CH2736SQB-1 (36”) / CH2742SQB-1 (42”) / CH2748SQ
6 INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TAB
Comments to this Manuals