Kobe CHX3030PDS-GL Manual Page 1

KOBE Range Hoods Brillia Series CHX30 Series (400 CFM with LED Li

7 Wiring to Power Supply SAFETY WARNING RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE B

8 Final Assembly 7. To install the parametric panel: - Align the parametric panel at the back of the unit. Refer to Figure 14. - Push the unit

9 OPERATING INSTRUCTIONS Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust s

10 MAINTENANCE SAFETY WARNING NEVER PUT YOUR HAND INTO AREA HOUSING THE FAN WHILE THE FAN IS OPERATING. Cleaning Hood Surface CAUTION: NEVER

11 SPECIFICATIONS SERIES CHX30 Series (400 CFM-LED) CONSUMPTION / AMPERE 0.82 Ampere VOLTAGE 120V 60Hz NUMBER OF MOTORS 1 DESIGN 20-Gauge Seaml

12 MEASUREMENTS & DIAGRAMS *** All inch measurements are converted from millimeters. Inch measurements are estimated. *** All measurements in (

13 - DIMENSIONS OF THE MODEL -

14 PARTS LIST SERIES: CHX30 SERIES (400 CFM) NO. DESCRIPTION MODEL /SIZE PART NO. 1 Motor Mounting Plate K-Y21-2355-P 2 Hood Frame CHX30

15 PART DIAGRAM FOR CHX30 SERIES (400 CFM)

16 CIRCUIT DIAGRAM SERIES: CHX30 SERIES (400 CFM) For models equipped with Push Control:

IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping da

17 TROUBLE SHOOTING Issue Possible Cause Solution After Installation, both motors and lights are not working. The power is not on. Make sure the c

18 WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized Dealer.

19 6. Product is purchased from an unauthorized KOBE dealer. 7. Product is damaged due to negligence, misuse, abuse, accident. If we determine tha

20 WARRANTY INFORMATION FORM Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1

KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA o

[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENTS IMPORTANT SAFETY INSTRUCTIONS ...

1 IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR

2 What to Do In The Event Of a Range Top Grease Fire • SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the

3 COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) Range Hood Box {A} KOBE Range Hood – 1 {B} Warranty Registration Card

4 INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TA

5 Preparation before Installation NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING. • Decide the location of t

6 Vent option installation 1. Choose the require vent option. NOTE: If the hood is to be installed as ductless application, please do not remo